VB-FullAir 4C

Full air suspension

Full air suspension on the front and rear axle: always the ideal ride height while driving, and a vehicle that can be raised and lowered when stationary.

VB-FullAir 4C

VB-FullAir 4C at a glance

VB-FullAir 4C is the full air suspension system from VB-Airsuspension: air springs take over the role of the original springs on both the front and the rear axle. “4C” (4-Corner) refers to the four level sensors – two at the front and two at the rear – so the control unit measures the vehicle’s position at every corner separately.

While driving, the vehicle always stays at the ride height set during installation, which is ideal for comfort and stability – both empty and fully laden. When stationary, the vehicle can be raised and lowered for easy entry, loading or levelling.

Key features

  • Air springs on the front and rear axle
  • Four level sensors, automatic level control
  • Constant, ideal ride height regardless of load
  • Entry and loading height that can be raised and lowered when stationary
  • Levelling when parked
  • Can be upgraded with adaptive shock absorbers (VB-DynActive)

Request a quote

Functions

Van (LCV)

  • AutoLevel when stationary
    Digital levelling function to set the vehicle level (as far as the spring travel permits).
  • Sport at all speeds
    Lowers the vehicle by around 30 mm for better handling and a firmer chassis.
  • Off Road below 30 km/h
    Raises the vehicle by approximately 30 mm for more ground clearance on rough terrain.
  • Car Park below 30 km/h
    Lowers the vehicle to almost its lowest level for easier entry and exit, or to enter a car park with a low roof or drive under a gate (depending on the original vehicle height).
  • Memory when stationary
    Activates the stored height.
  • Manual control when stationary
    Manual adjustment of the loading/unloading height.

Motorhome

  • AutoLevel when stationary
    Digital levelling function to set the vehicle level (as far as the spring travel permits).
  • Ferry below 30 km/h
    Raises the rear to the maximum level, for example to drive onto a ferry easily.
  • Off Road below 30 km/h
    Raises the vehicle by approximately 30 mm for more ground clearance on rough terrain.
  • Parking below 30 km/h
    Lowers the vehicle to almost its lowest level for easier entry and exit, or to enter a car park with a low roof or drive under a gate (depending on the original vehicle height).
  • Water drain when stationary
    Tilts the vehicle towards the side of the waste pipes so the waste tanks empty completely.
  • Load space when stationary
    The front axle is raised automatically and the rear is lowered to the minimum level, making it easy to load and unload at the rear.
  • Manual control when stationary
    Manual adjustment of the loading/unloading height.

The Ferry, Off Road, Car Park and Parking functions temporarily adjust the ride height up to 30 km/h, Sport works at all speeds, and the other functions can only be used when the vehicle is stationary. VB-FullAir 4C comes with a sophisticated remote control for easy operation of all functions.

How it works

The level sensors continuously measure the distance between the body and the axles. Based on this, the control unit uses the compressor and the valve block to let air into or out of the air springs, so the vehicle always stays at the set level.

With the control panel, the driver can choose between driving level, entry or loading level and raised level while stationary.

System components

  • Air springs at the front and rear
  • Shock absorbers
  • Four level sensors
  • Compressor and valve block
  • Electronic control unit (VB-ASCU)
  • Remote control
Levelling at the push of a button: the remote control brings the motorhome level even on uneven ground
Levelling at the push of a button: the remote control brings the motorhome level even on uneven ground
Entry level: when stationary the vehicle can be lowered, making the ramp flatter and getting in easier
Entry level: when stationary the vehicle can be lowered, making the ramp flatter and getting in easier
VB-FullAir 4C on the rear axle: the air suspension replaces the original springs
VB-FullAir 4C on the rear axle: the air suspension replaces the original springs
Level sensor: measures the distance between body and axle at every corner
Level sensor: measures the distance between body and axle at every corner

Have a question about your vehicle?

Ask for a quote tailored to your vehicle – we will help you personally.